Revision Date Description
l DMVPN phase 1 spoke support with NHRP or mGRE, including
compatibility with Cisco DMVPN hubs.
l Added support for SHA2 ciphers for IKEv2 IPsec tunnels.
n If the device has a configured System > Name, it is now displayed
on the Dashboard.
Additional changes
n Added serial port logging configuration documentation for these
serial port modes: Login, Remote Access, RealPort, or UDPSerial.
n Updated serial port logging information. See Review the serial
port message log.
n Added power loss and the device configuration information.
F December
2022
Release of Digi Connect EZ firmware version 22.11:
n Updated the Linux kernel to version 5.19.
n The intelliFlow feature now integrates with Digi Remote
Manager to provide aggregated insights and analytics for all Digi
devices in your environment.
n Added support for Next-hop routing protocol (NHRP).
n Added support for mGREtunnels.
n Added support for ICMP redirect messages.
n New commands: tail and grep.
n Add Timeout option to modem Carrier Scan window in the Web
UI.
n Added advanced watchdog to:
l Monitor critical services and reboot the device if those
services fail.
l Monitor memory usage and log errors or reboot the device
based on current memory usage.
n Added the ability to have serial port data written to the system
log.
l Removed options in the local web UI and Admin CLI for
manually starting, stopping, and clearing serial logs. These
actions are now controlled under the data logging
configuration settings.
E
September
2022
Release of Digi Connect EZ firmware version 20.8:
n Support for NEMO/DMNR virtual private networks.
n Support for serial Modbus Gateway.
n Support for VRRP+, an extension to the VRRP standard that uses
network probing to monitor connections through VRRP-enabled
devices.
Digi Connect EZ Mini User Guide
3
To Next Page
Loading...
Need help?
General