Diagnostics Analyze network traffic
Digi Connect EZ Mini User Guide
702
Analyze network traffic
The Connect EZ device includes a network analyzer tool that captures data traffic on any interface
and decodes the captured data traffic for diagnostics. You can capture data traffic on multiple
interfaces at the same time and define capture filters to reduce the captured data. You can capture
up to 10 MB of data traffic in two 5 MB files per interface.
To perform a more detailed analysis, you can download the captured data traffic from the device and
view it using a third-party application.
Note Data traffic is captured to RAM and the captured data is lost when the device reboots unless you
save the data to a file. See Save captured data traffic to a file.
This section contains the following topics:
Configure packet capture for the network analyzer 703
Example filters for capturing data traffic 712
Capture packets from the command line 713
Stop capturing packets 714
Show captured traffic data 715
Save captured data traffic to a file 716
Download captured data to your PC 717
Clear captured data 718
To Next Page
Loading...
Need help?
General