Digi Connect EZ Mini User Manual

Virtual Private Networks (VPN) L2TPv3 Ethernet
Digi Connect EZ Mini User Guide
317
3. To display details about a specific tunnel:
> show l2tp lns name lns_test2
lns_test2 L2TP Access Concentrator Status
------------------------------------
Enabled : true
Status : pending
>
4. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
L2TPv3 Ethernet
Your Connect EZ device supports Layer 2 Tunneling Protocol Version 3 (L2TPv3) static unmanaged
Ethernet tunnels.
Configure an L2TPv3 tunnel
Your Connect EZ device supports Layer 2 Tunneling Protocol Version 3 (L2TPv3) static unmanaged
Ethernet tunnels.
Required configuration items
n Aname for the L2TPv3 tunnel.
n Enable the tunnel.
n The remote endpoint IP address.
n The local endpoint IP address.
n The session ID.
n The peer session ID.
Additional configuration items
n Encapsulation type. If UDP is selected:
l The IDfor the tunnel.
l The IDof the peer's tunnel.
l Determine whether to enable UDP checksum.
n The session cookie.
n The peer session cookie.
n The Layer2SpecificHeader type.
n The Sequence numbering control.
Web

Digi Connect EZ Mini Specifications

General

Brand	Digi
Model	Connect EZ Mini
Category	Server
Language	English