Command line interface Display status and statistics using the show command
Digi Connect EZ Mini User Guide
735
For example:
show config
The show config command displays all the configuration settings for the device that have been
changed from the default settings. This is a particularly useful when troubleshooting the device.
> show config
auth tacacs+ service "login"
auth user admin password
"$2a$05$WlJQhquI7BgsytkpobKhaeLPtWraGANBcrlEaJX/wJv63JENW/HOu"
add auth user test
add auth user test group end "admin"
add auth user test group end "serial"
auth user test password
"$2a$05$RdGYz1sLKbWrqe6cZjlsd.otg03JZR6n9939XV6EYWUSP0tMAzO5W"
network interface lan ipv4 type "dhcp"
network interface lan zone "external"
schema version "445"
>
show system
The show system command displays system information and statistics for the device, including CPU
usage.
> show system
Model : Digi Connect EZ
Serial Number : Connect EZ-000065
SKU : Connect EZ
Hostname : Connect EZ
MAC Address : DF:DD:E2:AE:21:18
Hardware Version : 50001947-01 1P
Firmware Version : 23.6.1.105
Alt. Firmware Version : 23.6.1.105
Alt. Firmware Build Date : Tues, July 18, 2023 10:25:00
Bootloader Version : 19.7.23.0-15f936e0ed
Current Time : Tues, July 18, 2023 10:25:00 +0000
CPU : 1.4%
Uptime : 6 days, 6 hours, 21 minutes, 57 seconds (541317s)
Temperature : 40C
>
show network
The show network command displays status and statistics for network interfaces.
> show network
Interface Proto Status Address
To Next Page
Loading...
Need help?
General