Digi Connect EZ Mini User Manual

Applications Develop Python applications
Digi Connect EZ Mini User Guide
447
Help for using Python to execute Connect EZ CLI commands
Get help executing a CLI command from Python by accessing help for cli.execute:
1. Select a device in Remote Manager that is configured to allow shell access to the admin user,
and click Actions > Open Console. Alternatively, log into the Connect EZ local command line as
a user with shell access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type shell to access the device shell.
2. At the shell prompt, use the python command with no parameters to enter an interactive
Python session:
# python
Python 3.10.1 (main, Mar 30 2023, 23:47:13) [GCC 11.2.0] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>>
3. Import the cli submodule:
>>> from digidevice import cli
>>>
4. Use the help command with cli.execute:
>>> help(cli.execute)
Help on function execute in module digidevice.cli:
execute(command, timeout=5)
Execute a CLI command with the timeout specified returning the results.
...
5. Use Ctrl-D to exit the Python session. You can also exit the session using exit() or quit().
Use digidevice.datapoint to upload custom datapoints to Digi Remote Manager
Use the datapoint Python module to upload custom datapoints to Digi Remote Manager.
The following characteristics can be defined for a datapoint:
n Stream ID
n Value
n (Optional) Data type
l integer
l long
l float
l double
l string
l binary
n Units (optional)
n Timestamp (optional)
n Location (optional)

Digi Connect EZ Mini Specifications

General

Brand	Digi
Model	Connect EZ Mini
Category	Server
Language	English