Applications Develop Python applications
Digi Connect EZ Mini User Guide
456
i. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
iii. Click System > Scheduled tasks >Custom scripts.
iv. Click to add a custom script.
v. For Label, type Show system application.
vi. For Run mode, select On boot.
vii. For Exit action, select Restart script.
viii. For Commands, type python /etc/config/scripts/showsystem.py.
ix. Click Apply to save the configuration and apply the change.
Command line
i. Select the device in Remote Manager and click Actions > Open Console, or log into
the Connect EZ local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access
selection menu. Type admin to access the Admin CLI.
ii. At the command line, type config to enter configuration mode:
> config
(config)>
To Next Page
Loading...
