Digi Connect EZ Mini User Manual

Interfaces Wide Area Networks (WANs)
Digi Connect EZ Mini User Guide
54
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Set the metrics for Modem:
a. Click Network > Interfaces > Modem > IPv4.
b. For Metric, type 1.
c. Click IPv6.
d. For Metric, type 1.
4. Set the metrics for ETH1:
a. Click Network > Interfaces > ETH1 > IPv4.
b. For Metric, type 2.
c. Click IPv6.
d. For Metric, type 2.
5. Click Apply to save the configuration and apply the change.
The Connect EZ device is now configured to use the cellular modem WWAN, Modem, as its highest
priority WAN, and its Ethernet WAN, ETH1, as its secondary WAN.
Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the
Connect EZ local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.

Digi Connect EZ Mini Specifications

General

Brand	Digi
Model	Connect EZ Mini
Category	Server
Language	English