Digi Connect EZ Mini User Manual

System administration Schedule system maintenance tasks
Digi Connect EZ Mini User Guide
630
n If Check if Python Out-of-Service is set, the maintenance window will only start if the
Python Out-of-Service is set. See Use Python to set the maintenance window for further
information.
7. If Central Management is disabled, click Device firmware update to instruct the system to
look for any updated device firmware during the maintenance window. If updated firmware is
found, it will then be installed. This options is only available if Central Management is disabled;
see Central management for more information.
8. The Modem firmware update option, which is only available if Central Management is
disabled, is not used with the Connect EZ.
9. (Optional) Configure automated checking for device firmware updates:
a. Click to expand Firmware update check.
b. Device firmware update check is enabled by default. This enables the automated
checking for device firmware updates.
c. Modem firmware update check is enabled by default. This enables the automated
checking for modem firmware updates.
Note The Modem firmware update option is not used with theConnect EZ. Any selection
is ignored.
d. For Frequency, select how often automated checking for device and modem firmware
should take place. Allowed values are Daily, Weekly, and Monthly. The default is Daily.
10. Click Apply to save the configuration and apply the change.
Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the
Connect EZ local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. Configure a system maintenance trigger:
a. Add a trigger:
(config)> add system schedule maintenance trigger end
(config)>
b. Set the type of trigger:
(config add system schedule maintenance trigger)> type value
(config)>
where value is one of:

Digi Connect EZ Mini Specifications

General

Brand	Digi
Model	Connect EZ Mini
Category	Server
Language	English