Digi Connect Series User Manual

Hardware System statusLEDs
Digi Connect Family and ConnectPort TSFamily
156
LED/button
Color and Light
Pattern Description
Diag LED Amber Blinksduring product initialization and factory
reset, using the light patternsbelow. ThisLED
should never blink during normal operation. If it
blinksconstantly, contact Digi Technical
Support.
1-1-1blinking
amber
Initializing firmware.
1-5-1blinking
amber
Device configuration has been restored to its
factory defaults.
Other blinking
amber
Contact Digi Technical Support.
Solid amber Device ispowered on and ready for operation.
C1 & C2 LEDs Green These LEDsare provided for use by custom Linux
applicationsrunning on the unit.
Reset button N/A Performsequivalent of apower-cycle.
Serial TX Yellow Serial port istransmitting data.
Serial RX Green Serial port isreceiving data.
Ethernet Link LED Solid green Ethernet link isup. Will light solid green when an
active LAN connection isplugged into the
Ethernet port.
Ethernet Activity LED Blinking yellow Blinkswhen active traffic is on theLAN
connection.
ConnectPort TS8 and ConnectPort TS8 MEI

Digi Connect Series Specifications

General

Brand	Digi
Model	Connect Series
Category	Network Router
Language	English