Digilite Pulse MX - Page 41

41
PULSE MX
Editing a manual cue:
to load it in the editor, press the key Load + the ash of the controller (Press and hold the Load key
while pressing the ash key of the controller). Once you have completed your changes, simply press
the Update key to Update the values of the manual cue.
Changing the current Bank
To move to the next bank, press the Bank key twice in quick succession. To switch to a random bank,
press the Bank key in quick succession and the playback key of the desired new Bank (or press bank
key + playback key). The status bar of the console will reect the change.
The bank change inuences only the number One controllers of each bank (the Fixed controllers
always control the same cue, regardless of the current bank).
When you change a bank, you can no longer intervene on the active manual cues of the previous
bank, as the sliders and the controller keys control the cues of the new bank. Activation of new cues
happens when the slider passes through 0.
To regain control of the cues which are active in a bank other than the current one, you must activate
the bank in question crossing the old controller value with the slider.
Save controller: insert tag Fig.35