EasyManua.ls Logo

Dinolift 160XT - Page 18

Default Icon
127 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
160XT 180XT 210XT
Beware of the live aerial power lines in the area –
observe the minimum safety distances:
Voltage Min. distance below
(m)
Min. distance at the side
(m)
100 – 400 V hanging spiral
cable
0.5 0.5
100 – 400 V open-wire cable 2 2
6 - 45 kV 2 3
110 kV 3 5
220 kV 4 5
400 kV 5 5
Keep the lift free of any dirt, which may impair safe operation, and impede the inspection
of the structures.
The device must be serviced and inspected regularly.
Only skilled persons, familiar with the service and repair instructions, are allowed to carry
out servicing and repair work.
It is strictly prohibited to use a lift which is out of order.
The device must neither be altered without the manufacturer’s
consent nor be used under conditions, which do not meet the
manufacturer's requirements.
The operator must be given instructions and consent from the
manufacturer for all such specific work methods or conditions
that the manufacturer has not explicitly defined.
Courtesy of Crane.Market

Table of Contents

Related product manuals