20
160XT 180XT 210XT
6 INSPECTIONS
A thorough inspection of the lift must be carried out at least once every twelve (12)
months.
The inspection shall be carried out by a technically trained person who is familiar with the
operation and structure of the lift.
Draw up a protocol of the inspections and always keep it with the unit stored in the space
reserved for it.
Carry out the inspections regularly throughout the service life of the lift.
The inspection must be carried out within twelve (12) months of the first inspection or
previous regular inspection.
If the lift is used under extreme conditions, intervals between the inspections shall be
reduced.
The overall operating condition of the lift as well as the condition of the safety-related
control devices shall be established in the regular inspections. Particular attention shall
be paid to changes, which affect the operational safety.
In connection with the regular inspection shall be established to what extent the lessons
and practical experience gained since the previous inspection could be utilized to
improve the safety even more.
National legislation must be followed first of all.
Regular inspections and service measures are described more thoroughly in the chapter
“Service- and maintenance”.
Courtesy of Crane.Market
To Next Page
Loading...
