59
160XT 180XT 210XT
19.8 REGULAR SERVICE
The lift shall be serviced regularly at intervals of 11-12 month.
Under demanding conditions where moist, corrosive substances or corrosive climate may
speed up the deterioration of the structure and induce malfunctions, the inspection must
be performed more often and the influence of corrosion and malfunctions must be
reduced by using appropriate protective means.
Only technical specialists who are familiar with the structure and the operation of the lift
are allowed to maintain the lift.
We recommend turning to the service staff of the dealer.
SCHEDULE FOR REGULAR SERVICING
1. Clean the lift thoroughly before the service
The hydraulic and electric appliances must not be dismantled if they are not clean. Any
contaminants in the system may cause malfunctions later on. Wash the lift externally.
Be careful not to direct the high pressure water jet straight to the
electric appliances, such as the control centres on the chassis and on
the platform, relays, solenoid valves and limit switches.
- use pressure air to dry the electric devices, hydraulic connectors etc. before opening
them
- apply appropriate moisture repellent to the electric appliances after the drying
- always protect the piston rods with e.g. CRC3-36 anti-corrosive agent after washing
with a solvent
Remember cleanliness.
Courtesy of Crane.Market
To Next Page
Loading...
