6
160XT 180XT 210XT
1 EU Declaration of Conformity
Manufacturer:
Dinolift Oy
Raikkolantie 145
FI-32210 Loimaa, FINLAND
which has authorised the Chief Engineer Mr. Seppo Kopu, Dinolift Oy, Raikkolantie
145, 32210 Loimaa, FINLAND, to draw up the Technical Construction File,
declares that
DINO 160XT Aerial Work Platform no YGC D160XT X X XXXXX
DINO 180XT Aerial Work Platform no YGC D180XT X X XXXXX
DINO 210XT Aerial Work Platform no YGC D210XT X X XXXXX
complies with the provisions of the Machine Directive 2006/42/EC and its
amendments as well as the national decree (VNA 400/2008), through which they
have been brought into effect as well as the regulations of the Low Voltage Directive
2000/14/EC, the Directive 2000/14/EC and the EMC Directive 2004/108/EC
To the assessment procedure of conformity has been applied: 2000/14/EC, Annex V:
Internal control of production.
Measured sound power level Petrol/Diesel L
wa
(96 + 1,5) 97,5 / (98,5+1,5) 100 dB
Guaranteed sound power level Petrol/Diesel L
wa
(97.5 + 0,5) 97,5 / (100+0,5) 100 dB
Notified body no. 0537,
VTT
P.O.Box 1300
FI-33101 Tampere
FINLAND
has granted the certificate no.VTT 176 / 524 / 09
In designing the machine, the following harmonised standards have been applied:
SFS-EN 280/A1+A2; SFS-EN 60204-1/A1
LoimaaXX.XX.XXXX
(place) (date)
-----------------------------------------
(signature)
Seppo Kopu
Chief Engineer
(name in block letters, position)
Courtesy of Crane.Market
To Next Page
Loading...
