Dinolift 160XT - Wheel Brakes and Bearings

56
160XT 180XT 210XT
19.6 WHEEL BRAKES AND BEARINGS
Adjusting the brakes
Support the lift by raising its wheels off the ground.
Make sure that the wheels can rotate freely.
The brake rods must be slack (with the
handbrake released).
Check the attachment of the brake
rods.
Turn the adjustment wheel, behind the hole marked by the arrow, until the wheel no
longer can be turned by hand.
Turn the bolt counter-clockwise until the wheel can be turned freely.
SÄÄTÖ
ADJUSTMENT
Courtesy of Crane.Market