74
160XT 180XT 210XT
20.3 MONTHLY INSPECTION (MAINTENANCE INSPECTION)
This inspection shall be performed by a person who is well familiar with the lift.
Task list for the inspection:
- perform the daily inspection measures
- check the attachment points of the boom and the platform
- check the operation and condition of the platform's levelling system
- inspect visually the load-bearing structures
chassis
turning device
telescope (fully extended)
support outriggers and their joints
welded seams for any cracks, corrosion or breaches
have the possible repair welds been properly executed
- check that the platform does not “drift” (refer to the service instructions)
- check that the outriggers do not “drift” (refer to the service instructions).
- check the hydraulic oil level
- check the electro-hydraulic rotary adaptor for oil leaks or seizures
- check the tyres and the tyre pressure
- check the wheel bolts and the rims
- check the turning gear for play
- check the operation of the driving device
- check the condition and attachment of the electric wires
- check the condition and attachment of the battery
- check the condition of the overrun
- make sure that all the signs, warnings and pictorials for the operating controls and
the control equipment are in place, in good condition and clean
- check that the lift is clean all over
Courtesy of Crane.Market
To Next Page
Loading...
