EasyManua.ls Logo

Dinolift 160XT - 15 Special Instructions for Winter Use

Default Icon
127 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
46
160XT 180XT 210XT
When moving the lift using the driving device, a suitable length for the jockey wheel's
stem can be achieved by adjusting the gap between the lower surface of the tow-
bar/brake rod and the wheel to 1-3 cm. Then the wheel may turn freely.
15 SPECIAL INSTRUCTIONS FOR WINTER USE
- the lowest allowed operating temperature of the lift is -20 °C.
- if the temperature is below zero, let the power unit run for a few minutes before
starting the movements
- start with a few movements to warm-up oil in the cylinders and to ensure proper
operation of the valves
- check that the limit switches and the emergency descent devices are operational
and clean (from dirt, snow, ice, etc.)
- protect the control centre and the platform from snow and ice whenever they are
not in use
Always keep the lift free from dirt, snow etc.
Courtesy of Crane.Market

Table of Contents

Related product manuals