34
160XT 180XT 210XT
6. If you have levelled the chassis of the lift ON A GRADIENT, turn the
boom around carefully in the lower position to make sure that the
boom does not bang against the support outriggers.
7. turn the boom to the side so, that you can lower it
8. extend the telescope as much as is necessary to ensure that stepping onto the
platform is safe
Do not damage the tow-bar jockey wheel
The boom movements are noticeably slower when the emergency descent system is
used.
The speed of the boom movements cannot be adjusted continually with the control levers
when the lift is operated from the chassis control centre.
Lock the selector switch (1) in position 1 (support outriggers) before working under the
boom.
Make sure that neither people nor load are on the platform.
Courtesy of Crane.Market
To Next Page
Loading...
