77
160XT 180XT 210XT
Check the condition of the gas springs
- check the condition of the master and slave cylinder bearings and pins as
well as the locking of the pins
- check the condition of the boom's joint
- check the bearing and the pin of the boom joint and the locking of the pin
- check the condition and attachment of the articulated arm joint pins and
bearings
- check the support outriggers and their footplates
- check the mechanical structure of the outriggers and the welded seams
The structures must not show signs of deformations or cracks No fractures
or cracks are allowed in the welded seams.
- check the footplates for deformations, cracks or breaches
Also check that the footplate can turn freely on its joint.
- inspect the boom
- extend the telescope and check that there are no permanent deformations,
dents or traces of substantial wear in the boom
- also check the welded seams for wear, cracks or breaches
- check the boom attachment for cracks or breaches
- check the condition of the platform brackets
- check the locking of the platform pin
- check the condition and attachment of the flyer-chain, the locking of the
pins and the tightness of the spring
- check the condition of the cable chain, its clamp brackets as well as the
tightness of the screw connections
- check the play and attachment of the gliding surfaces on the boom.
- inspect the platform
- general condition
- check that the platform does not show signs of deformations, substantial
wear or buckles
- check that the handrails, the steps, the gate and the attachment of the gate
are in order
- check that the lock of the gate and the gas spring are in order
- check the condition of the platform floor plate
- check the platform carrier for notable buckles or deformations
- check all the protective covers
- check the condition of the support outrigger cylinder guards
- check the condition of the slave cylinder guard
- check the condition of the boom end cover, turning device covers, chassis
control centre cover, safety device cover, platform control centre cover and
the rear light cover
- perform visual inspection of all the screw connections
Courtesy of Crane.Market
To Next Page
Loading...
