EasyManua.ls Logo

Dinstar DWG2000E - 3.2.5 Console Port Access; 4. WEB Interface Configuration; 4.1 Accessing the DWG2000 E Unit

Dinstar DWG2000E
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DWG2000E/F/G GSM/CDMA VoIP Gateway User Manual
_______________________________________________________________________________
Shenzhen Dinstar Technologies Co., Ltd.
12
3.2.5 Console port access
The gateway provide Console port for maintenance purpose. It adopts RS232 standards with
band rate 115200bps.
4. WEB Interface Configuration
DWG2000F/G serials gateway has the same web interface. This charpter describes web
configuration of DWG2000E. The DWG2000E contains an embedded web server to set
parameters by using the HTTP protocol. We are strongly recommend to access device with
Google Chrome or Firefox Browser.
The configuration introduction also suitable for following models:
DWG2000E-4G
DWG2000E-8G
DWG2000F-16G
DWG2000F-8G
DWG2000G-32G
DWG2000E-8C (8 Channels CDMA Gateway)
DWG2000E-4C (4 Channels CDMA Gateway)
DWG2000F-16C (16 Channels CDMA Gateway)
DWG2000G-32c (32 Channels CDMA Gateway)
4.1 Access DWG2000E unit
Enter IP address of DWG2000E in IE/Google Chrome. The default IP of LAN port is
192.168.11.1. and the GUI shows as below:
Figure 4-1-1 WEB log interface

Table of Contents

Related product manuals