Dinstar DWG2000E - Tel->IP Operation

DWG2000E/F/G GSM/CDMA VoIP Gateway User Manual
_______________________________________________________________________________
Shenzhen Dinstar Technologies Co., Ltd.
48
4.9.2 Tel->IP Operation
Figure 4-9-4 Tel->IP Operation
Table 4-9-2 Description of Tel->IP Operation
Parameters
Description
Tel->IP Operation
It is an optional configuration item. To enable following features in
this menu:
 Forbid Call
 Call Back
 Auto Call
 Allow Call
 Password Authentication
Index
It uniquely identifies a rule. Its value is assigned globally, ranging
from 0 to 31.
Source Port
It specifies the source port which come from mobile
Source Prefix
All the caller number must match the source prefix. It specifies the
source prefix allow to send call out
 Any: include anonymous, 0xxxx, 1[2-9]xxxx etc.
 0xxxx: consist of some digits such as 015,08,09
 1[3-8]6:consist of some prefix, include 136,146,156,166,176, 186
Destination Prefix
All the called number must match the destination prefix, the call