Dinstar DWG2000E - Tel->IP Source Numbers

DWG2000E/F/G GSM/CDMA VoIP Gateway User Manual
_______________________________________________________________________________
Shenzhen Dinstar Technologies Co., Ltd.
42
It indicates that calls coming from IP Group will match the prefix ”any”, and the called
nubmer which match with the prefix ”2547” will delete 3 digits in front of it and replace it by
digit ”0”.
4.8.2 Tel->IP Source Numbers
Figure 4-8-3 Tel->IP destination numbers manipulation
Table 4-8-2 Description of Tel->IP destination numbers manipulation
Parameters
Description
Tel->IP Source
numbers
manipulation
It is an optional configuration item, and is used to add IP->Tel
number change data. The IP->Tel Manipulation defined the rules of
add, and deletion of called numbers, which are referenced by
IP->Tel routing.
Index
It uniquely identifies a route. Its value is assigned globally, ranging
from 0 to 31.
Description
It describes the rule for the ease of identification. Its value is
character string