Dinstar DWG2000E - 4.6 Mobile Configuration; 4.6.1 Basic Mobile Configuration

DWG2000E/F/G GSM/CDMA VoIP Gateway User Manual
_______________________________________________________________________________
Shenzhen Dinstar Technologies Co., Ltd.
23
4.6 Mobile Configuration
4.6.1 Basic Configuration
Figure 4-6-1Basic Configuration
Table 4-6-1 Description of Basic Configuration
Parameters
Description
Dial Tone Gain
It is the dial tone volume of call waiting, dial tone of mobile module when
call out. Usually adopt the default configuration.
Select Band
According to carrier’s band standards. Standards are as bellow:
GSM: 850/900/1800/1900 MHz
Notes: it is take effective for GSM only
Forward Enable
When port occupied whether allow call forwarding
Forward Master
Mobile
Choose the destination port to be forwarded
Remote API
Enable
API is an opened protocols which provide to users to develop third party
application software such as bulk SMS, SIM card management etc. The
default is "No".
API Server
Address
It is the remote IP address of application software/ API server. This is an
option when selecting "Yes" under 'remote API enable".