Dinstar DWG2000E - 4.14.4 Management Parameter Settings; 4.14.5 Configuration Backup; 4.14.6 Configuration Restore

DWG2000E/F/G GSM/CDMA VoIP Gateway User Manual
_______________________________________________________________________________
Shenzhen Dinstar Technologies Co., Ltd.
68
Table 4-14-1 Management Parameter
Parameters
Description
NTP Parameter
The Network Time Protocol (NTP) is a protocol and software
implementation for synchronizing the clocks of computer systems
over packet-switched, variable-latency data networks.
User need to fill the NTP Server Address and select Time Zone
Web Port
Default is 80
Telnet Port
Default is 23
4.14.5 Config Backup
Figure 4-14-3 Data backup
Click 'Backup' to download configuration file to your computer.
4.14.6 Config Restore
Figure 4-14-4 Config Restore