Dinstar DWG2000E - 4.12.3 Port Parameter; Port Configuration Details

DWG2000E/F/G GSM/CDMA VoIP Gateway User Manual
_______________________________________________________________________________
Shenzhen Dinstar Technologies Co., Ltd.
62
SIP Response
404
Not Found
408
Request Timeout
403
Forbidden
486
Busy Here
480
Temporarily unavailable Resource unavailable
503
Service Unavailable
Response Code switch
This part specifies response codes of SIP between gateway and SIP server. Refer to table
SIP Response, the SIP server possibly need some specific SIP response from the
gateway. Example, SIP server need SIP response 180 Ringing instead of 183 Ringing,
the configuration should be as below:
4.12.3 Port Parameter
Figure 4-12-3 Port List
Figure 4-12-4 Port Configuration