Dinstar DWG2000E - Manipulaton Configuration; IP->Tel Destination Numbers

DWG2000E/F/G GSM/CDMA VoIP Gateway User Manual
_______________________________________________________________________________
Shenzhen Dinstar Technologies Co., Ltd.
40
Add mobile to mobile route,its mainly used for saving the cost between two carriers.It
indecates that calls coming from Port 0 will match the prefix 13[58], ”13[58]” include prefix
135 and 138, caller number can’t match prefix 135 and 138 will reject by gateway.
Meanwhile sending the calls to Port Group 31<Unicom> if called number match with
prefix 133.
4.8 Manipulaton Configuration
4.8.1 IP->Tel Destination Numbers
Figure 4-8-1 IP->Tel destination numbers manipulation
Table 4-8-1 Description of IP->Tel destination numbers manipulation
Parameters
Description
IP->Tel destination
numbers
manipulation
It is an optional configuration item, and is used to add a rule for
changing number