Dinstar DWG2000E - Tel->IP Destination Numbers

DWG2000E/F/G GSM/CDMA VoIP Gateway User Manual
_______________________________________________________________________________
Shenzhen Dinstar Technologies Co., Ltd.
44
It indicates that all incoming calls which matched with source & destination prefix ”any”, to
delete original caller number and replace by 0788888.
4.8.3 Tel->IP Destination Numbers
Figure 4-8-5 Tel->IP destination numbers manipulation
Table 4-8-3 Description of Tel->IP destination numbers manipulation
Parameters
Description
Tel->IP destination
numbers
manipulation
It is an optional configuration item which used to add Tel-> IP
destination number manipulation rules. The Tel-IP Manipulation
defined the rules of add, and deletion of called numbers, which are
referenced by Tel->IP routing.
Index
It uniquely identifies a route. Its value is assigned globally, ranging
from 0 to 31.
Description
It describes the route for the ease of identification. Its value is