Dinstar DWG2000E - Page 28

DWG2000E/F/G GSM/CDMA VoIP Gateway User Manual
_______________________________________________________________________________
Shenzhen Dinstar Technologies Co., Ltd.
27
Table 4-6-2 Description of Mobile Configuration
Parameters
Description
Mobile Number
SIM card number of the channel. That must be configured when
“Forward” function enable.
Step
Step length value range is 1-120 s, step length multiplied by time of
single call just said a single call duration time allowed.
Enable Call Duration
Limitation single call
Define maximum call duration for single call.
Example: if Time of single call set to 10, the call will be
disconnected after talking 10*step seconds
Time of single call
The value of limitation single call, this value range is 1-65535. Step
length multiplied by time of single call just said a single call duration
time allowed.
Enable Call Duration
Limitation
This function is to limit the max call duration of channel. The max
call duration is between 1 to 65535 steps.
Auto reset
Set a time make device reboot