Dirui CS-T240 - Page 106

106
maximum
and
minimum is
within
following
range
(internal
standard,
sample)
Cl：
0.8mv≤|FIV
（2）-FIV
（4）|
62-1 Note
ISE
Prepare
abnormal
The slope
value of
calibration
result is
within
following
range or the
impact of
electrode is
low
(cross-conta
mination
rate (A) is
as
following
Na：（1）
32.0mv≤SL
OPE≤37mv
or
68.1mv≤SL
OPE
(1) Enter into system maintenance, and
execute "ISE check."
(2) please refer to " electrolyte device
maintenance " in the "user manual" for
detail.
62-2 Note
ISE
Prepare
abnormal
The slope
value of
calibration
result is
within
following
range or the
impact of
electrode is
low
(cross-conta
mination
rate (A) is
(1) Enter into system maintenance, and
execute "ISE check."
(2) please refer to " electrolyte device
maintenance " in the "user manual" for
detail.