Dirui CS-T240 - Page 107

107
as
following
K：（1）
32.0mv≤SL
OPE≤37mv
or68.1mv≤S
LOPE
62-3 Note
ISE
Prepare
abnormal
The slope
value of
calibration
result is
within
following
range or the
impact of
electrode is
low
(cross-conta
mination
rate (A) is
as
following
Cl：（1）
-30mv≤SL
OPE≤-25m
v
or-68.1mv≥
SLOPE
(1) Enter into system maintenance, and
execute "ISE check."
(2) please refer to " electrolyte device
maintenance " in the "user manual" for
detail. 
63-1 Note
ISE slope
value
（SLOPE）
abnormal
（1）The
slope value
of
calibration
result is
within
following
range or the
impact of
electrode is
low
(cross-conta
mination
rate (A) is
as
following:
Na：（1）
SLOPE＜
32.0mv
（2）current
(1) Enter into system maintenance, and
execute "ISE check."
(2) please refer to " electrolyte device
maintenance " in the "user manual" for
detail.
(3) Please re-execute ISE calibration.