Distech Controls ECLYPSE ECY-STAT User Manual

66 ECLYPSE Connected Thermostat (ECY-STAT)
13. When setting up a new SSO connection, a message is displayed to notify you that a new certificate
has been detected. To validate the authenticity of the server, click Continue.
Figure52: SSO New Certificate Detected
14. A new page is displayed confirming that the server settings are being applied. After approximately
1 minute, you can refresh your browser manually using the F5 key or close and reopen your
browser.
To switch from the SSO Mode to Radius or Local Mode, you will be asked to log in to the remote or local server.
These credentials are the ones associated to the server you wish to switch to.
ECLYPSE Web Interface

Distech Controls ECLYPSE ECY-STAT Specifications

General

Brand	Distech Controls
Model	ECLYPSE ECY-STAT
Category	Thermostat
Language	English