DMP XF6 - Wireless Devices and Accessories

Digital Monitoring Products XF6 Series Installation and Programming Guide
16
1164Wireless Smoke Detector
with Synchronized Sounder
Causes sounders to initiate when any fire zone is tripped on the panel, which also
triggers any other wired strobes and strobe horns. The cadence is dictated by the
panel, synchronizing the alarm tones of all wired and wireless devices.
1164NS-W Wireless Smoke
Detector with No Sounder
Has the same functionality as the 1164Smoke Detectors without the built-in
sounder. The 1164NS is intended for use in installations with existing sounder/
notification devices.
1168Wireless Smoke/CO/Low
Temp Detector
Provides multi-criteria smoke sensing using a combination of photoelectric heat,
IR flame flicker, carbon monoxide (CO) indicators, and a low temp sensor. The
1168reports carbon monoxide, fire alarms, and low temp to the control panel.
1183-135Heat Detector The 1183-135F is a fixed temperature detector that reacts to heat by responding to
the fixed 135degree temperature setting. The 1183-135R model is a combination
rate-of-rise and fixed temperature detector that detects heat quickly by
responding to a rapid temperature increase or a fixed 135degree temperature
setting.
1184Carbon Monoxide Detector A 3V battery-powered wireless carbon monoxide (CO) detector that provides
early warning when the electrochemical sensing technology measures carbon
monoxide levels in the air. The transmitter can send alarm, trouble, tamper and low
battery condition messages to the alarm panel.