Dobot CR Series User Guide
Issue V1.1 (2023-04-27) User Guide Copyright © Yuejiang Technology Co., Ltd.
7
The emergency stop switch will be locked after you press it. To unlock the switch, you need to
rotate the switch according to the mark on the switch.
WARNING
Please operate the robot to recover from the emergency only after the danger of the robot
system is completely removed.
Forced joint movement
In the unlikely event of an emergency, you may need to move the robot joint/s when the
robot power is either impossible or unwanted. In this case, you must push or pull the robot arm
hard to move the joint.
WARNING
Moving the locked joints forcefully may cause joint damage. Please operate only in
emergencies.
To Next Page
Loading...
