Cooling
System
DODGE
Turbo Diesel
Install the
pressure
cap. Start the engine and operate it until it
reaches
a temperature of 83°C [181°F].
Check
the
system
for
leaks.
Warning: If the engine has been operating and the
coolant is hot
y
wait until the temperature Is below 50°C
[120°F] before removing the pressure cap. Failure to do
so
ran
cause
personal Injury from heated coolant spray.
Caution:
Re-check the cooling system to insure
total
system
is full of coolant
Cooling
System
Replacement
Procedures
Page
7-21
To Next Page
Loading...
