Dodge D350 1990 - Refrigerant Compressor - Install

Heating and Air Conditioning
DODGE Turbo Diesel
Refrigerant Compressor - Install
Page 24-3
Refrigerant Compressor - Install
9/16 Inch
Position the compressor so the four capscrew bosses are
aligned with the holes in the brackets.
Insert the capscrews (A) and (B) and tighten evenly.
Torque Value: 47 N-m [35 ft-lb]
10mm
Remove the protective caps from suction (A) and discharge (B)
line and ports and Install onto the compressor using new
gaskets. Tighten the capscrews.
Torque Value: 20 N-m [15 ft-lb]
Reconnect the clutch electrical wire.