CHRYSLER
MOTORS
DODGE
Turbo Diesel
Introduction
•Page*
1-1
General Repair Instructions
The Dodge Ram/Cummins Turbo 5.9 Liter
Diesel
engine incorporates the latest
diesei
technology, yet it
is
designed
to be repaired using existing repair practices
performed
to
quality
standards.
Follow All Safety instructions
Noted
in the Procedures i: A
Follow the manufacturer's recommendations for cleaning solvents and other
substances
used during the repair of
the engine.
Also,
be
sure
to use good safety
practices
with
tools and equipment.
Provide a Clean Environment and Follow the Cleaning Instructions Specified in the Procedures.
Cleanliness
is very
important
during the repair of a diesei engine. Contamination of the engine during repair
will
reduce the
life
of an engine.
Perform the Inspections Specified in the Procedures.
Replacement of worn and damaged parts is also
necessary
for a
successful
repair - the engine can not be
better
than
its components.
Use
Genuine MOPAR Service Parts and
Assemblies.
The assembly instructions have been
written
for reusing as many parts and
assemblies
as is practical.
When
it is
necessary
to replace a
part
or
assembly,
the procedure is based on the use of new or reconditioned parts. All of the
repair
service
described
in this manual
is
available
from
all Dodge truck dealer locations.
Follow the Specified
Disassembly
and Assembly
Procedures
to Avoid Causing Damage to the Parts and to Be Sure
That the Components Are Correctly
Assembled
and Tightened.
To Next Page
Loading...
