Electrical System
DODGE Turbo Diesel
Engine Electrical System Replacement Procedures
Page 8-13
7mm,
8mm, 10mm
Remove and tag all wires and complete the following steps.
13mm
Remove the alternator link capscrew.
13mm, 15mm
Remove the alternator mounting capscrew.
7mm, 8mm, 10mm, 13mm, 15mm
install
the alternator. Tighten the upper mounting
capscrews
^
before tightening the lower mounting
bolt.
Re-connect
all
wires.
^
Torque Value: Upper
Capscrew
-24 N-m [18 ft-lbs]
Lower
Bolt - 43 N-m [32 ft-lbs]
To Next Page