Dodge D350 1990 - Page 198

Base Engine Components
DODGE Turbo Diesel
Engine Lubricating System
Page 9B-19
10mm
Remove the oil cooler cover, gaskets and coder element. t-tm
Clean the sealing surfaces.
Apply 483 kPa [70 PSI] air pressure to the element to check for [3M
leaks.
10mm
Assemble the oil cooler gaskets, element and cover.
Torque Value; 24 N-m [18 ft-lbs]
Note: Be sure to remove the plastic shipping plugs from a new
element.