In-Chassis
Repairs
Page9F4
Base Engine Components
DODGE Turbo Diesel
H
Clean ail parts in a strong solution of laundry detergent in hot
water.
\j Use compressed air to dry the parts after rinsing in clean hot
water.
Note:
The pedestals are made from powdered metal and may
continue to show wetness after they have been cleaned and
dried.
^S|
Inspect for excessive wear in the bore and the contact surface
for the valve stem.
0
Measure the rocker lever bore.
Diameter (Maximum): 19.05mm [0.75
inch]
To Next Page
Loading...
