Alternative Repair Procedures
Page9K-22
Base
Engine Components
DODGETurbo Diesei
O o
Install the valves in their designated locations and measure the
depth of
each.
D
jxsxr/j,
Va,ve
Depth Limit
(Integral
and Inserted Seats)
C
« 0.99mm to
1.52mm
[.039 to .060 inch]
Note:
Replace
the valve if the depth is over the
limit.
Apply a
light
coat of
valve
lapping compound to each valve and
lap
each
valve to its mating seat.
Remove the valves and clean lapping compound
from
the
valves
and
seats.
To Next Page
Loading...
