Exhaust
System
and Intake
Manifold
DODGE
Turbo Diesel
Air System
Page
11-17
Caution:
New turbochargers must be prelubricated
with
clean
engine lubricating oil before start up.
Pour
50 to 60cc [2 to 3
ounces]
of oil into
supply
fitting.
Note:
Rotate the turbine wheel to allow oil to enter the
turbocharger.
5/8 inch
Install the oil supply line.
Torque Value: 15 N-m [11 ft-lbs]
After installing the air intake and exhaust piping, operate the
engine to
check
for
leaks.
To Next Page
Loading...
