Fuel System Replacement Procedures
Page
14-34
Fuel System
DODGE
Turbo Diesel
12mm, 1/2
inch,
17mm
Install the
fuel
pump
vent line and
capscrew.
Torque Value 32 N-m [24 ft-lbs]
Install the air
fuel
control tube.
Tighten the banjo
fitting.
Torque Value 12 N-m [9 ft-lbs]
10mm
jpl|
Install the
throttle
bracket and linkage.
When
connecting the
cable
to the control lever, adjust the
length
so the lever has
stop-to-stop movement.
1. Torque Value: 24 N-m [18 ft-lbs]
2.
Torque Value: 10 N-m [7.5 ft-lbs]
3. Stop to Stop Adjustment
Bleed
all air
from
the
fuel
system.
Screw
Driver, 10mm Wrench
If
necessary,
adjust
the idle
speed.
To Next Page