DTG M Series Maintenance Manual Product Overview
9
2.1 Introduction
This chapter explains the features, part names, and functions of the printer.
2.2 Features
The features of the printer are explained below.
2.2.1 High Resolution Image Quality
This model uses the drop on-demand piezo head with a high performance coated nozzle plate.
The ability to eject >40pl droplet size enables excellent white ink delivery.
2.2.2 Ink Supply System
This model uses a microprocessor controlled pressurised color ink supply system and a patented
White Ink Management System (WIMS) utilising high performance brushless motors designed to
provide trouble free, accurate white ink delivery at all times.
2.2.3 Operation Efficiency Improvement
Loading media onto the media platens is done away from the printer and then slipped into the
ACCULOK platen locating and holding system.
2.2.4 Operability Improvement
The simple and intuitive GO/NO GO system uses two high brightness LED’s to indicate to the user
whether or not the printer is ready to receive a print job.
Sending a print when either LED is not green will result in a failed print job.
To Next Page
Loading...