DTG Digital DTG M2 User Manual

MANUAL
DTG M SERIES PRINTER
ALL INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED AS IS WITHOUT WARRANTY
OF ANY KIND. THE CREATOR OF THIS DOCUMENT , HEREINAFTER REFERRED TO AS THE
'WRITER' HEREBY DISCLAIMS ALL WARRANTIES, EXPRESSED, IMPLIED OR OTHERWISE,
INCLUDING WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. THE WRITER DOES NOT ASSUME
OR AUTHORIZE ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION
WITH THIS CONTENT. IN NO EVENT SHALL THE WRITER BE LIABLE TO THE READER OF THE
CONTENT OF THIS DOCUMENT, OR ANY SUBSEQUENT USER, INCLUDING THE ULTIMATE END-
USER, IN CONTRACT, TORT, WARRANTY, STRICT LIABILITY, OR OTHERWISE FOR ANY SPECIAL,
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO, THE
COST OF LABOR, REQUALIFICATION, DELAY, LOSS OF PROFITS OR GOODWILL, EVEN IF THE
WRITER IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. BY LOOKING AT THE CONTENT OF
THIS DOCUMENT THE READER AGREES THAT THEY HAVE READ AND AGREE TO THE ABOVE
CONDITIONS ENTIRELY.
USER GUIDE
REV. PR
DTG-M-T-1.0 DRAFT ONLY - NOT RELEASED

DTG Digital DTG M2 Specifications

General

Print Resolution	Up to 1440 dpi
Ink Type	Water-based Pigment Ink
Connectivity	USB
Operating System	Windows
Ink Colors	CMYK + White
Garment Compatibility	Cotton, Cotton Blends
Print Technology	DTG (Direct to Garment)
Power Requirements	110-240V, 50/60Hz

Summary

Important Notice

Warranty Limitations

Warranty Disclaimer and Liability

States the document is provided 'as is' without warranties, disclaiming liability for damages.

Safety Instructions

Important Safety Guidelines

Detailed safety instructions for safe printer usage, covering placement, power, and handling.

Warning Labels

Initial Setup and Basic Operations

Printer Installation Requirements

Guides on location, environment, and space for printer installation.

Minimum Computer Requirements

Basic Printer Operations

Covers fundamental printer operations like power, connection, panel controls, and head cleaning.

Initial Setup Procedures

Covers the initial setup procedures for the printer, including ink fill and media loading.

Printing on Textiles

Image and Garment Preparation

Loading Garments and Printing Process

Post-Printing and Job Management

General Care and Maintenance

Ink System Maintenance

Procedures for maintaining the printer's ink system, including capping station, flushing tray, wipers, and head caps.

Other Maintenance Items

General Care and Environment

Troubleshooting

Troubleshooting with Error Messages

How to troubleshoot issues based on displayed error messages like data, command, and system errors.

Troubleshooting Without Error Messages

How to troubleshoot issues without error messages, covering initial operation, printing, noise, curing, and other problems.