DTG Digital DTG M2 - Important Notice

Important Notice
DTG M Series Maintenance Manual
i
I. Important Notice
For Users in Europe 1.
IMPORTANT:
This is a Class A product approved for industrial environments. In some
environments this product may cause radio interference in which case you may
be required to take measures to re-locate this product.
For Users in the United States 2.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
Trademarks Mentioned in this Manual 3.
• DTG, WIMS, AOD, ACCULOK AND BMS are registered trademarks or product names of
IMPRESSION TECHNOLOGY.
• Centronics and BiCentronics are registered trademarks or product names of Centronics Data
Computer Corporation.
• Windows XP, Windows Vista, Windows 7 and MS- DOS are registered trademarks or product
names of Microsoft Corporation.
• Intel and Pentium are trademarks or registered trademarks of Intel Corporation.
• Other company and product names may be registered trademarks or product names.
•
No part of this product or publication may be stored, reproduced, copied, or
1.
transmitted in any form or by any means without the express permission of
IMPRESSION TECHNOLOGY.
The product and the contents of this publication may be changed at any time without
2.
prior notification.
IMPRESSION TECHNOLOGY has made the best efforts to keep this publication free
3.
from error, but if you find any uncertainties or misprints, please call us or the dealer
from where you bought this equipment.
IMPRESSION TECHNOLOGY shall not be liable for any damages or troubles resulting
4.
from the use or mis-use of this equipment or this manual either directly or indirectly.