DTG Digital DTG M2 - Printing Problems

136
Troubleshooting DTG M Series Maintenance Manual
6.3.2 Printing Problems
TABLE 6-9 SYMPTOMS, CHECK ITEMS AND ACTIONS FOR PRINTING PROBLEMS
No.
Symptom
Check Item
Action
Reference
1
Media feed after
printing is excessive
1. Turn machine OFF.
Disconnect mains
power, wait 5
minutes.
Turn it ON again and
check if symptom is
repeated.
If the symptom is
repeated: Contact your
authorized DTG
Distributor or Technician
for further assistance
3.5.2
"Switching the
Printer OFF."
p.31
3.5.1
"Switching the
Printer ON"
p.29
2
Missing dots in
printing.
1. Perform cleaning
twice consecutively.
3.5.5
"Performing a
Head Clean
from the
Operation
Panel" p.41
2. Is ink tube filled with
ink?
Perform initial ink
charge.
5.5.1
"Powerful
Head
Cleaning" p.97
3. Perform
“Print:Nozzle Check
of printer self-
diagnosis or “Test
Print”
If the nozzle check
patterns are printed
correctly, refer to the
action in check item No.
4.
3.6.6
"Performing a
Nozzle Check
Test Print"
p.53
4.
If the symptom persists:
Contact your authorized
DTG Distributor or
Technician for further
assistance