The table below lists the items available in the Road Pro Infomode.
no. Description
1 Speed
It is displayed increased by 5% and together with the set unit of measurement (km/h or mph).
2 Riding Mode in use
3 Gear
4 Rev counter
5
Power and Torque
This function allows the user to get a quick overview of relevant power and torque information.
Power and torque are displayed in round graphs: the outer ring and inner number indicate the per‐
centage of torque required in relation to the maximum that can be delivered by the engine over the
entire operating range, while the inner ring indicates the percentage of torque required in relation to
the current engine point.
6 Air temperature (°C or °F)
Note
When the motorcycle is stopped, the engine heat could influence the displayed temperature.
If the warning lights in the lower corner are active or if the function menu is active, the air
temperature indication is display is displayed toward the centre.
7 Clock
It is possible to set it through the “Date and time” function in the - Display” menu.
120
To Next Page
Loading...
