EasyManua.ls Logo

Ducati MULTISTRADA V2 - Maintaining the Battery Charge

Ducati MULTISTRADA V2
338 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintaining the  charge
Your motorcycle is equipped with a connector (1),
under the seat, to which you can connect a special
 charger (2)  charge maintenance kit
 no. 69928471A (Europe),  no. 69928471AW
(Japan), 69928471AX (Australia), 69928471AY (UK),
69928471AZ (USA), available from our sales network.
Remove the connector (1) from the clamp (A) and
connect it to the  charger (2).
Note
The electric system of this model is designed so
as to ensure there is a very low power drain when the
motorcycle is OFF.  the 
features a  self-discharge rate that is normal
and depends on ambient conditions as well as on
"non-use" time.

If  is not kept at a minimum charge level
by a suitable  charge maintainer, sulphation
may occur and this is an irreversible phenomenon
causing decreasing  
When the motorcycle is  unused (approximately
for more than 30 days). We recommend owners to
use the Ducati  charge maintainer 
1
Fig 19
2
1
A
Fig 20
42

Table of Contents

Related product manuals