Main use and
maintenance operations
"Checking coolant level and topping
up, if necessary"
Press at the indicated point to release the cover (1).
the cover (1) to check coolant level in the
expansion tank on the right side of the vehicle.
Check the level according to the intervals indicated
in the tables in "Scheduled maintenance
Check that the level is between the MIN and MAX
marks on the side of the expansion reservoir.
Top up if the level is below the MIN mark.
Unscrew the filler plug (2) and add ENI Agip
Permanent Spezial antifreeze (do not dilute, use
pure), until reaching the MAX level.
Screw the plug (2) back on and close the cover (1) by
pressing at the indicated point and checking that it is
properly closed.
This type of mixture ensures the best operating
conditions (the coolant to freeze at
-20 °C/-4 °F).
Fig 239
Fig 240
268
To Next Page
Loading...
