Ducati MULTISTRADA V2 - Settings - Vehicle - Service and Info

 - Vehicle - Service and info
This function allows viewing the deadlines for the
next service coupons,  voltage and the
engine rpm digital indication.
●
Enter the  menu.
●
Use 
and to select the “Vehicle”
item and press the  .
●
Select the “Service and Info” item.
The following information will be displayed:
●
Total (km or miles)
●
VIN (vehicle identification number)
●
Oil service (remaining kilometres or miles)
●
Valve Clearance Check Service (remaining
kilometres or miles)
●
Service Check (date)
●
RPM (engine rpm in digital format)
●
  voltage)
When a service is due it is highlighted in yellow.
If the  voltage is between 11.0 and 11.7 volts or
between 15.0 and 16.0 volts, the  data is
displayed flashing in red.
If the  voltage is less than 11.0 volts, "LOW" is
displayed flashing in red instead of the  data.
If the  voltage is more than 16.0 volts, "HIGH"
is displayed flashing in red instead of the 
data.
This function does not allow any kind of changes.
Total
260.000 km
VIN
XXXXXXXXXXXXXXXXX
Oil service
-18.000 km
Valve clearance
check service
99.000 km
Service check
XX/XX/XXXX
RPM
Batery
13.8 volt
12.000
Service and info
PIN code
Lap
Tyre pressure
Close
Back
Vehicle
120
°C
09:09
am
N
Gear
A
Fig 160
193